Your Selected Product
Share
STECS Throttle System - Standard
STECS Throttle System - Standard
STECS Throttle System - Standard
The STECS Standard has a sturdy steel baseplate and non-slip rubber pads, allowing you to use it on your desk or attach it to a sim rig or chair mount. It also has an MFH (MultiFunctional Holder) compatible fixture for adding frontal extension modules.
Please note that a GNX MFH is not included and must be purchased separately if frontal extension modules will be part of your setup.
The STECS Standard baseplate has the same hole pattern as the TM HOTAS Warthog.
Looking to customize your STECS Standard? Explore our range of STECS Accessories.
Searching for desk mounts for your STECS Throttle? Browse our UCM Desk Mount collection.
When attaching a STECS Throttle with a STEM Module to a UCM Desk Mount, remember to also include a STEM Back Cover in your order, as the Back Cover is not included here by default.
Includes
- 1 STECS base
- 1 MTG-L grip
- 1 MTG-R grip
- 5 Detent Frames
- 4 L-shape detent - regular
- 4 L-shape detent - large
- 5 V-shape detent - regular
- 5 V-shape detent - large
- 2 W-shape
- 1 STEM module
- 1 STECS Accessory Magazine
- 1 Phillips head screwdriver
- 1 Hex screwdriver
- 1 USB cable (180 cm / 6')
STECS Throttle Grips
MTG-L (Modern Throttle Grip Left) Features
- 2 Buttons
- 2 Triggers
- 2 Wheel Encoders
- Red rubber pad pre-installed; green and gray pad included
MTG-R (Modern Throttle Grip Right) Features
- 2 Triggers
- 1 Analog Ministick with center push
- 1 Analog Wheel Axis
- Pre-configured Button Modules:
- 2 Buttons
- 1 3-Position Hat
- 2 5-Position Hats
- Additional Included Button Modules:
- 3 Buttons
- 3 5-Position Hats
- 3 Replaceable Hat caps
- Red rubber pad pre-installed; green and gray pad included
- 8 Buttons
- 2 K-switches with central push buttons
- 2 Encoders with central push buttons
- 1 Self-centering 3-position flip switch
- 1 3-Position Flip Switch
- 2 Analog Axes
- 4 Ball bearings on main axes
- 2 Buttons
- 1 5-Position Rotary Switch
- Grips and base made from industrial-grade ABS
- Base reinforced with glass-fiber-reinforced PA for load-bearing structures
- Tabletop baseplate made from steel
- 32-bit ARM Controllers inside the base and grip
- ALPS buttons for extended longevity
- Contactless MaRS sensors with high resolution
- Firmware upgrade via USB
- Onboard memory for profile storage
- Dimensions
Video Guides
STECS Standard Specific Video Guides
- STECS Standard - Program switches, encoders, and buttons as axes
- STECS Standard - Program extra button on 3-way switch and toggle
Warranty
- 2 Years
Support
Support
For video guides and tutorials to get started with our products, check our official VKB YouTube Channel. |
For controller setup, configuration or firmware support, be sure to visit our official Discord Channel. This also provides the quickest turnaround times for answers and solutions. |
For hardware warranty support, order cancellations or returns, please open a Support Ticket. Please note that your VKB North America Order # is required to open a ticket. |
Downloads
Downloads
Firmware | Version | Uploaded |
Firmware for all VKB devices | v2.16.5 | Sep 10, 2023 |
Configuration Apps | Version | Uploaded |
VKBDevCfg Device Configurator | v0.92.88 | Aug 28, 2023 |
VKB zBootloader | v1.9654654 | Aug 27, 2023 |
T-Link | v0.75 | Sep 19, 2023 |
Testing/Troubleshooting Apps |
VKB Joy Tester |
VKB Button Tester |
VKB Show HID |
Documentation | Version | Uploaded |
NJoy32 Family Controllers Configuration Utility – User Guide |
v2.19 | August 17, 2023 |